English
Lietuvių
- New
- New
FIIO BTR13 portable Bluetooth receiver / DAC
Write your review
BTR13
€75.00
Tax included
Earn 7 points when you buy me!
worth €2.10!
Manufacturer warranty for all products
Fast and secure delivery
14 days return policy| Name/Model | BTR13 | Hardware solution | DAC: CS43131*2, USB/Bluetooth decoding: QCC5125 |
| Color | Black/Blue | Volume control | Physical button |
| Weight | About 28.6g | Dimensions | About 63.2x30x18.8mm |
| Driver-free mode (switch mode) | Supported | Phone decoding (USB dongle) | Supported (switch the Mode Switch to PHONE) |
| Microphone | Supports Bluetooth voice call, built-in omnidirectional microphone | In-vehicle mode | Auto on/off following the USB of the vehicle |
| Gain | L/H | Channel balance | ＜0.2dB |
| Deep standby | Auto-enters power saving mode if no connection in 3 minutes, and the time can be set in the app. | FiiO Control | Supports settings in the app |
| Bluetooth codec indication | Blue: SBC; Cyan: AAC; Purple: aptX/aptX LL; Yellow: aptX HD; White: LDAC; Green: aptX adaptive | Status indication | The display indicates transmission codec, charging status, battery level, volume, sampling rate, EQ, and menu |
| Display | 0.96-inch TFT (80*160) bezel-less display | Bluetooth reception (5.1) | AAC/SBC/aptX/aptX LL/aptX Adaptive/aptX HD/LDAC |
| Recommended impedance | PO: 8~150Ω | Firmware upgrade | OTA upgrade, through FiiO Control |
| BAL: 8~350Ω | Max supported sampling rate | PCM: up to 96kHz/16bit | |
| Buttons and Ports | |||
| Physical button | Power button*1; Multifunction button*1; Volume up/down button*1 | USB | TYPE-C USB (Charging/Data transmission) |
| Headphone output | Standard 3.5mm plug | Balanced headphone output | Standard 4.4mm plug |
| Trigger switch | Mode switch*1 | ||
| Power Supply Parameters | |||
| Power supply | DC 5V /1A | Battery capacity | 460mAh lithium polymer battery |
| Charging time | ≤2 hours | ||
| Battery Life and Test Conditions | |||
| 3.5mm headphone out: ≥8 hours | |||
| Audio input | Bluetooth reception | Bluetooth codec | AAC |
| Volume | 22 levels | Gain | High |
| Display status | Off | Play track and format | MP3 44.1kHz/16bit |
| EQ | Off | Load | 32Ω |
| 4.4mm BAL headphone out: ≥8 hours | |||
| Audio input | Bluetooth reception | Bluetooth codec | AAC |
| Volume | 21 levels | Gain | High |
| Display status | Off | Play track and format | MP3 44.1kHz/16bit |
| EQ | Off | Load | 32Ω |
| 3.5mm headphone out: ≥10 hours | |||
| Audio input | USB dongle mode (switch the Mode Switch to PHONE) | Gain | High |
| Volume | 22 levels | Play track and format | 44.1kHz/16bit |
| Display status | Off | Load | 32Ω |
| EQ | Off | ||
| 4.4mm BAL headphone out: ≥10 hours | |||
| Audio input | USB dongle mode (switch the Mode Switch to PHONE) | Gain | High |
| Volume | 21 levels | Play track and format | 44.1kHz/16bit |
| Display status | Off | Load | 32Ω |
| EQ | Off | ||
| Audio Parameters | |||
| Parts of performance and parameters of headphone output (3.5mm, UAC decoding) | |||
| Output power | L+R≥120mW+120mW (16Ω, THD+N＜1%) | Output impedance | ＜0.6Ω |
| L+R≥100mW+100mW (32Ω, THD+N＜1%) | Crosstalk | ≥75dB | |
| L+R≥10mW +10mW (300Ω, THD+N＜1%) | Output amplitude | 1.75Vrms | |
| THD+N | ＜0.0018% (1kHz/-4dB@32Ω) | SNR | ≥125dB (A-weighted) |
| Frequency response | 20Hz~40kHz: damping＜3dB | Noise floor | ＜1uV (A-weighted) |
| 20Hz~20klHz: damping＜0.1dB | |||
| Parts of performance and parameters of BAL headphone output (4.4mm, UAC decoding) | |||
| Output power | L+R≥130mW+130mW (16Ω, THD+N＜1%) | Output impedance | ＜1Ω |
| L+R≥220mW+220mW (32Ω, THD+N＜1%) | Crosstalk | ≥124dB | |
| L+R≥55mW+55mW (300Ω, THD+N＜1%) | Output amplitude | 2.7Vrms | |
| THD+N | ＜0.0018% (1kHz/-6dB@32Ω) | SNR | ≥128dB (A-weighted) |
| Frequency response | 20Hz~40kHz: damping＜3dB | Noise floor | ＜1uV (A-weighted) |
BTR13
You might also like
