Reloop HiFi Turn X premium turntable
Write your review
Premium Class HiFi Turntable System
Reloop's Turn X is a quartz-driven, high-end turntable that impresses in more ways than just its sound and premium aesthetics
1 Item
€1,299.00
€1,099.00 Save €200.00
Tax included
Earn 109 points when you buy me!
worth €32.70!
Manufacturer warranty for all products
Fast and secure delivery
14 days return policy
FEATURES
- Quartz-controlled, premium HiFi turntable
- Super high torque, direct drive DC motor with ultra-precise rotation speed
- Quick start-up and drift-off rotation speed less than +/-0.03%
- Full manual operation with motor control-switch to select three different speeds (33, 45 and 78 RPM)
- Precision machined, extra heavy aluminium die-cast platter for a perfectly balanced rotation (305 mm diameter, 22.5 mm thick, 2.1 kg)
- Deadening rubber covering rear platter surface & special 5 mm rubber mat for optimized resonance control and damping
- Sunk-in platter cavity construction
- Static-balanced S-shaped tonearm with VTA adjustment
- Adjustable anti-skating wheel for optimal pick-up tracking
- Pre-installed Ortofon 2M Blue cartridge for excellent dynamics and sound resolution
- Universal headshell connector (SME) provides added flexibility
- Counterweight supplied supports a wide variety of cartridges
- Premium, high-resolution audio phono outputs (with separate grounding connection)
- Gold-plated, corrosion-resistant audio connections (detachable power and RCA cables)
- Built-in switching power with ultra-low noise isolation design
- Rigid construction, with extra-heavy, solid MDF wooden plinth
- Height-adjustable, shock-resistant insulator feet for effective decoupling
- Timeless design with high-gloss, black piano finish
- Accessories included: Turntable platter, dust cover, 2x dust cover hinges, balance counterweight, PHONO RCA cable with grounding cable, AC power cord, rubber mat, instruction manual, Ortofon 2M Blue cartridge & headshell
TECHNICAL DATA
Turntable Section:
- Type of turntable: Direct drive, fully manual
- Drive: Quartz driven upper-torque direct drive with precision rotation
- Motor: DC Motor, 16-Pole, 3-Phase, brushless
- Rotation speeds: 33 1/3, 45 & 78 RPM
- Starting Torque: More than 4500 g/cm
- Start-up time / rpm change: Less than 0.3 sec.
- Wow and Flutter: Less than 0.1% WRMS (JIS WTD)
- S/N Ratio: More than 60dB (DIN-B)
- Breaking System: Electronic brake
Turntable Platter:
- Turntable Platter: Aluminium die-cast
- 305 mm diameter
- Weight About 2.1 kg
Tonearm Section:
- Type: Static balanced S-Shape
- Effective Length: 230 mm
- Overhang: 15 mm
- Tracking Error Angle: Less than 3 degrees
- VTA Adjustment Range: 0-6 mm
- Applicable Cartridge Weight: 17 – 25 g (incl. Headshell)
- Anti-Skating Range: 0-3 g
- Terminals: 1x PHONO Out (gold-plated), 1x GND Earth Terminal
Cartridge:
- Type of cartridge: Ortofon 2M Blue
- Output voltage at 1000 Hz, 5cm/sec.: 5.5 mV
- Channel balance at 1 kHz: 1.5 dB
- Channel separation at 1 kHz: 25 dB
- Channel separation at 15 kHz: 15 dB
- Frequency response: 20-20.000 Hz + 2 / - 1 dB
- Tracking ability at 315Hz at recommended tracking force: 80 µm
- Compliance, dynamic, lateral: 20 µm/mN
- Stylus type: Elliptical
- Stylus tip radius: r/R 8/18 µm
- Tracking force range: 1.6-2.0 g (16-20 mN)
- Tracking force, recommended: 1.8 g (18 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 1.3 kOhm
- Internal inductance: 700 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 150-300 pF
- Cartridge colour, body/stylus: Black/Blue
- Cartridge weight: 7.2 g
General:
- Power Supply: AC IN 100~240V, 50/60 HZ
- Power consumption: 3W
- Dimensions: 460(W) x 367.3(D) x 172.6(H) mm
- Weight: 10.35 kg
- Incl.: dust cover + 2x hinge, rubber mat, power supply cable, RCA cable with grounding connection (gold-plated), Headshell with Ortofon 2M Blue (pre-installed), turntable platter, operation manual & counterweight
1 Item
You might also like